Smap3D Plant Design: Der Component Wizard

Ab der Version “Smap3D Plant Design 2016” ist der Component Wizard verfügbar. Dieser  Assistent führt einen Anwender komfortabel durch die notwendigen Schritte, um aus einem normalen 3D CAD-Modell eine Komponente für Smap3D Plant Design zu machen. Dabei wird die CAD-Einzelteildatei in mehreren Schritte interaktiv mit den benötigten Anschlusspunktdefinitionen und Datei-Eigenschaften aufbereitet, um diese im Anschluss direkt für die in der Version 2016 enthaltene zusätzliche Normteilverwaltung “File System” zur Verfügung zu stellen.

Erste Schritte mit dem Component Wizard

  • Standardmäßig ist der Wizard im Windows Startmenü CAD-Partner > Smap3D Plant Design 2016 > Admin Tools verfügbar.
  • Wurden die Smap3D Toolbars (= Plant Design Administrator) installiert, dann ist die dazugehörige Schaltfläche im Normalfall in der Einzelteilumgebung Ihres CAD-Systems verfügbar.
  • Bei der Erstellung oder Bearbeitung von Rohrklassen im Rohrklasseneditor mit aktiver zusätzlicher Normteilverwaltung “File System” wird ein Anwender gefragt, ob er eine bestehende Plant Design Komponente verwenden oder eine neue mit dem Component Wizard aufbereiten möchte.

1. Auswahl des Komponententyps

Im ersten Schritt muss ein Anwender auswählen, welchem Komponententyp das aktive 3D CAD-Modell entspricht.

Tipp: In der Version “Smap3D Plant Design 2016” werden nur Einzelteildateien unterstützt.Für Baugruppendateien empfehlen wir weiterhin die Verwendung des Coordinate System Wizard.

2. Anschlusspunkte und CS Info

Nun müssen die für den gewählten Komponententyp notwendigen Anschlusspunktdefinitionen am 3D-Modell erzeugt werden.

Mit den Schaltflächen “Hinzufügen” wird der “Coordinate System Wizard” gestartet. Die verfügbaren Optionen werden gefiltert auf die passenden Parameter gemäß dem gewählten Komponententyp und dem jeweiligen Anschluss (Anschlussnummer).

Mit dem “Coordinate System Wizard” muss nun die jeweiligen Anschlusspunktdefinitionen (= Koordinatensysteme und CSInfo-Eigenschaft) im 3D Modell erzeugt werden.

BEACHTEN SIE DABEI DIE JEWEILIGE ANSCHLUSSNUMMER, DIESE MUSS AN DIE PASSENDE GEOMETRIE BZW. POSITION IM 3D-MODELL ANGEBRACHT WERDEN.

Erst wenn alle Anschlusspunktdefinitionen (Schaltflächen) Grün dargestellt werden, sollte man mit “Weiter” fortfahren.

3. Eigenschaften

In diesem Schritt werden gemäß dem Komponententyp die “Benötigten” und/oder “Optionalen Standardeigenschaften” angezeigt. Werden “Benötigte Eigenschaften” angezeigt, so muss ein Anwender die passenden Werte dazu eingeben. “Optional Eigenschaften” könnten unausgefüllt bleiben. Wir empfehlen jedoch, so viel Informationen wie möglich für die Komponente zu hinterlegen, um diese ggf. für zukünftige Anforderungen vorzubereiten.

Neben den standardmäßig angezeigten optionalen Eigenschaften können noch weitere optionale Eigenschaften erzeugt werden (Funktionen dazu im Kontextmenü).

4. SKEY Definitionen

Jetzt kann optional die SKEY Definition für die Komponente durchgeführt werden, die für Smap3D Isometric benötigt wird. D. h. Ist kein Smap3D Isometric im Einsatz, so kann diese Eigenschaft leer bleiben. Je nach Komponententyp steht eine gefilterte Liste mit möglichen SKEY Werten zur Verfügung.

5. Komponente speichern

Zuletzt wird die aufbereitete Komponente gespeichert. Wurde die aktive 3D-Einzelteildatei bereits vor der Aufbereitung mit dem Component Wizard im Normteilordner für die zusätzliche Normteilverwaltung “File System” abgespeichert (oder in einem beliebigen Unterordner), so wird dieser in der Zeile “Speicherort” angezeigt. Durch Klick auf die Schaltfläche “Fertigstellen” mit anschließender Bestätigung (“JA”) wird die aktive 3D-Datei an diesem Speicherort überschrieben/ersetzt.

Wird für die aktive 3D Einzelteildatei ein Speicherort außerhalb des Normteilordner für die zusätzliche Normteilverwaltung “File System” erkannt, so wird in roter Schrift eine zusätzliche Meldung im Fenster des Component Wizard angezeigt.

In der Zeile “Speicherort” wird der im Plant Design Administrator eingestellte Normteilordner für die zusätzliche Normteilverwaltung “File System” angezeigt. Mit der rechten Schaltfläche kann dieser Speicherort zu einem darin befindlichen Unterordner geändert werden.

Durch Klick auf die Schaltfläche “Fertigstellen” wird eine Kopie der aktiven 3D-Datei am eingestellten Speicherort gespeichert.

Die mit dem Component Wizard durchgeführte Aufbereitung ist in diesem Fall nur in der Kopie vorhanden. Die originale Datei (außerhalb des Normteilordners) wird dabei nicht geändert.

Druck Druck

Smap3D Plant Design: The Component Wizard

The Component Wizard is available with Smap3D Plant Design 2016. This assistant guides a user comfortably through the necessary steps for making a component for Smap3D Plant Design from a standard CAD 3D model.
A CAD part file is interactively processed in multiple steps with the required connection point definitions and file properties, so that it is immediately available for use with the new additional standard parts administrator File System.

First steps with the Component Wizard

  • By default, it is always available in the Windows Start Menu CAD-Partner > Smap3D Plant Design 2016 > Admin Tools.
  • If Smap3D Toolbars (from within the Plant Design Administrator) are installed, the associated button can be accessed in the “part”-environment of your CAD.
  • When creating or editing pipe specifications in the Pipe Specification Editor with an active File System standard parts provider, the user is asked if he wants to use an existing Plant Design component or prepare a new one with the Component Wizard

1. Selecting the component type

In the first step, the user must select which component type corresponds to the active CAD 3D model.

Tip: In the first version of the Component Wizard are only part files supported. For assemblies we recommend to use the Coordinate System Wizard.

2. Connection points and CS Info

Next, the necessary connection point definitions must be created for the selected component type.

The respective “Coordinate System Wizard” is started with the “Add” buttons. The available options are each filtered on the corresponding parameters in accordance with the selected component type and the respective connection (connection number).

With the “Coordinate System Wizard” a user must create the respective connection point definitions (coordinates system and CS Info property) in the 3D model.

PLEASE NOTE THE RESPECTIVE CONNECTION NUMBER. THIS MUST BE ATTACHED TO THE CORRESPONDING GEOMETRY OR POSITION IN THE 3D MODEL.

Tip: Click Next only after all connection point definitions (interfaces) are displayed in green.

3. Properties

In this step, the “required” and/or “optional standard properties” are displayed in accordance with the component type. If “required properties” are displayed, a user must enter the corresponding values for these. “Optional properties” can theoretically remain empty, but we recommend adding as much information as possible for the components so that these are also ready for any future needs.

In addition to the optional properties displayed by default, further optional properties can be created (the functions for this are in the context menu).

4. SKEY definitions

The SKEY definition for the components can be performed in the next step (only required for Smap3D Isometric). A filtered list with possible SKEY values is available for each component type. An SKEY definition is optional. If you are not using Smap3D Isometric, this property can remain empty.

5. Save component

The processed component is saved in the last step. If the active 3D part file was already saved before processing with the Component Wizard in the standard parts folder for the additional standard parts provider “File System” (or a sub-folder therein) this is displayed in the Folder “location line”. By clicking on the “Finish” button followed by “Yes”, the 3D file is overwritten/replaced at this storage location.

If a storage location for the active 3D part file is recognized outside of the standard parts folder for the additional standard parts provider “File System”, an additional notification is displayed in red text in the Component Wizard window.

The “location” folder for the standard parts folder for the additional standard parts provider “File System”, set up in Plant Design Administrator, is displayed in the Storage location line. This storage location can be changed to a sub-folder with the button on the right.

By clicking on the “Finish” button, a copy of the active 3D part file will be stored in the established folder location.

Preparation done with the Component Wizard is only available as a copy in this case. The original file (outside of the standard parts folder) is not changed.

Druck Druck